Summary :
Sometimes, when you connect an external hard drive to your computer, it might not show up or get recognized. This problem occurs frequently in Mac/Windows 10, and could lead to data loss.
Mar 08, 2015 In this article we’ll discuss how to check your hard disk for bad sectors with HDAT2 application and MHDD will be also mentioned in the bonus section. In our previous article regarding computer hardware identification you saw that with HWiNFO application you can access SMART info of your hard drive and see possible errors on your disk; with additional scanning for bad sectors, you.
There are some useful fixes to the external hard drive not detected issue. Please read this page to know how to access the drive without data loss.
Quick Navigation :
Check for the USB drive in Windows Explorer; Note Connecting your USB external hard drive into a non-powered USB hub can cause a lack of enough power to operate the external drive. Instead, plug it directly into your computer. If this method does not resolve your issue, proceed to Method 2. The main difference: MHDD does not use DOS or BIOS functions or interrupts and works even if the BIOS does not detect the drive. You can turn on your drive after DOS boots (A small risk of drive damage exists if you are not careful). MHDD works directly with IDE or Serial ATA controller so it does not know about partitions, file systems, BIOS. Mhdd Not Detecting Drive Rating: 8,3/10 9801 votes The host protected area (HPA) is an area of a hard drive or solid-state drive that is not normally visible to an operating system.It was first introduced in the ATA-4 standard CXV (T13) in 2001. May 04, 2020 If not, you can buy a new external SATA-to-USB adapter dock or enclosure, plug your bare drive into that, then connect that to your PC over USB. If it works, then your old enclosure (or its power.
External Hard Drive Not Showing Up PC
Whether you're plugging in a new hard drive or an old one to your computer, it is possible that you can't see it. Some people even reported that the external hard drive is showing up in devices but not in my computer. This is not a rare issue; it has ever happened to many people and will be happening to more.
What are the possible causes for external hard drive not showing up on computer issue?
- Insufficient power supply
- Lack of drive letter
- Outdated drivers
- File system issues
- Partition problems
- Dead USB port
- …
In the following content, I’ll mainly discuss external hard drive not showing up/recognized on Windows 10 in 2 different situations. After that, I’ll tell you what do I do if my hard drive is not detected.
External Hard Drive Not Showing Up in File Explorer
Seagate external hard drive not showing up.
I know there are a million posts about this issue, but I haven't come across one that fixed my issue and I really don't want to have to shell out a ton of money recovering my data. Running Windows 10 on an Asus K55N and connecting a Seagate Free Agent Go Flex Desk 2TB external drive. When I connect the drive, it shows in Disk Management and the Safely Remove Hardware icon, but I can't get it to populate in File Explorer. I have not tested on another computer, but I have tested with a different USB cable and was able to connect two other external drives. I did the trial of the Seagate Recovery Suite and was able to see all my files listed, I was just hoping to not have to pay to recover the data (if that's what it boils down to, so be it).- said Corey_23 on Tom’s Hardware Forum
It’s easy to find that an external hard drive doesn't appear in File Explorer after you connected it to a Windows 10 computer. You should go to open Windows Disk Management to check whether your disk shows up there. If you find the external hard disk showing up in Disk Management as unallocated/not initialized/offline, it would be easy to fix the external hard drive not recognized problem. This is what people described as external hard disk detected but not showing in My Computer.
![Not Not](https://d2rormqr1qwzpz.cloudfront.net/photos/2016/07/13/89607-13689414_10209849765709708_1666531654_n.jpg)
Please read Recover Data From Disk Shows As Unknown Without Damaging It to learn how to fix this.
Tip: If Seagate external hard drive not showing up on Windows 10, can you access data in it? Please read Exciting News: Seagate Hard Drive Data Recovery Is Simplified and learn how to finish Seagate external hard drive recovery.
External Hard Drive Not Showing Up in Disk Management
WD external hard drive not recognized Windows 10.
Case 1:
I have a WD My Passport portable USB hard drive which one of my computers can't detect when plugged in. It doesn't show up in My computer, Device Manager or Disk Management. The only way to get the device recognized is to reboot the computer with it connected, enter BIOS (and do nothing), and reboot again. The drive works fine on my other computer. It has the WD Unlocker Software built in.- posted by Lagnaetti on Windows 10 Forums, Drivers and Hardware
Obviously, Lagnaetti finds that his external hard drive is not being detected by My computer, Device Manager or even Disk Management. He wants to know how to fix the external hard disk not detected issue. In fact, there are some cases in which an external hard drive doesn't show up due to it being broken physically. Yet, there are still chances that the unrecognized hard disk can be repaired.
Tip: The WD external hard drive is used widely by people throughout the world. And I advise you to recover data from WD external hard disk which is not detecting. To know “how do I fix my WD external hard drive not showing up on my computer”, please read the next part of this article.
In addition, there are also some people who said their PS4 external hard drive is not recognized or Xbox One external hard drive is not detected/not showing up. I suggest that they connect the external hard drive to the computer and check.
How Do I Get Windows 10 to Recognize My External Hard Drive
- Change a USB port.
- Check the drive in Disk Management.
- Run the Troubleshooter.
- Update/uninstall/roll back driver.
- Reinstall USB controllers.
- Enable legacy USB support in BIOS.
- Update system to the latest version.
- Disable USB selective suspend setting.
- Update motherboard chipset drivers.
- Fix the system built-in drivers.
- Kill virus on the computer and external drive.
There are many useful workarounds for fixing the external hard drive not being detected in Windows 10 (how to repair hard disk not detected in Windows 7 is basically the same).
Method 1: Change a USB Port
The most direct reason why an external hard drive is not detected by computer is a broken USB port. You should try to connect the hard drive via another USB port or on another computer. If the USB device not recognized problem is solved, it is the USB port that should be blamed.
Additionally, the USB drive not showing up Windows 10 may also occur when the power supply of a USB port is not sufficient. In this case, I advise you not to use USB hubs because some of them are not able to provide enough power supply to the external hard drive.
Method 2: Check & Fix the Drive in Disk Management
Sometimes, an external hard drive not showing in Windows Explorer could appear in Disk Management. How to open Disk Management:
- Press Windows + X keys.
- Click on Disk Management option from the pop-up menu.
What prevents a drive from showing up:
- External hard drive Unallocated
- External hard drive Not Initialized
- External hard drive Offline
- No drive letter
How to fix the problem in the above 4 cases:
Case 1: create a new volume.
- Right click on the unallocated space.
- Choose New Simple Volume (or other volume types you need).
- Click on the Next button in the New Simple Volume Wizard Welcome window.
- Specify the volume size and click Next.
- Finish Assign Drive Letter or Path and click Next.
- Finish Format Partition and click Next.
- Click on the Finish button in the New Simple Volume Wizard Completing window.
- Wait for the operation to complete.
Watch how to Create Partition with MiniTool Partition Wizard.
Case 2: Initialize Disk:
- Right click on the unknown, Not Initialised disk.
- Choose Initialise Disk from the context menu.
- Choose a partition style from MBR and GPT and click on the OK button to confirm.
- Wait for the operation to complete.
Use MiniTool Partition Wizard to Initialize to MBR Disk or Initialize to GPT Disk.
Case 3: set Online:
![Mhdd Mhdd](https://i.ytimg.com/vi/uJZWFjYAYx0/maxresdefault.jpg)
- Right click on the disk which shows Offline.
- Choose Online from the pop-up menu.
- Wait a second.
Case 4: Change Drive Letter and Paths:
- Right click on the disk partition which has no drive letter.
- Choose Change Drive Letter and Paths from the context menu.
- Click on the Add button in the pop-up window.
- Assign a drive letter to the partition and click OK to confirm.
- Wait a second.
Change Drive Letter more easily with MiniTool Partition Wizard.
Do you want to recover your files from external hard drive not detected? If yes, please read the following tutorial.
How to recover files from external hard drive not detected?
Step 1: download MiniTool Power Data Recovery. Then, install and launch it. (To recover files from external hard drive not showing up on Mac, you need Stellar Data Recovery for Mac.)
Step 2: Choose Removable Disk Drive from the main window and select the external hard drive.
Step 3: click on the Scan button to scan the selected external hard drive.
Step 4: browse the scan results during the scan. Alternatively, you can wait until the end of the scan and then select the files you want to restore.
Step 5: press the Save button and choose another drive with enough free space to store the recovered files.
Step 6: press the OK button to confirm the selection and start external hard drive file recovery.
At last, you can check the recovered files to put an end to the recovery work.
Please read this page if your external hard drive seems dead and you need to recover important data from it:
If you are stuck in finding ways to recover files from dead external hard drive efficiently, this passage will be very helpful.
Method 3: Run Troubleshooter
For USB device not recognized in Windows, there is a useful tool to help: Hardware and Device Troubleshooter.
How to run Hardware and Device Troubleshooter:
- Open Settings the way you like.
- Choose Update and Security from Windows Settings panel.
- Go to the Troubleshoot tab.
- Scroll down to choose Hardware and Devices from the right pane.
- Click on the Run the Troubleshooter button.
- Wait for the detecting to complete.
- Once the scan is completed, Windows will list the found issues.
- You should choose the issue you want to fix and click Next.
Method 4: Fix Device Driver Problems
Outlook for mac unread only. You can open Device Manager to check and fix the issue.
- Press Start + X keys on the keyboard.
- Choose Device Manager from the pop-up menu.
- Expand Disk drives option.
- Right click on the problematic drive.
- Choose from Update driver, Uninstall device and Properties.
- Finish the rest steps by looking at system prompt.
- The Update driver feature helps to fix the USB drive not recognized problem due to a corrupted/outdated device driver.
- The Uninstall device feature is used to uninstall your USB external hard drive with the issue. After that, you should remove the USB device from the computer and then reconnect it after at least 1 minute. This is useful when your USB driver has become unstable or corrupt.
- The Properties feature will help you further diagnose the problem by looking at the error Besides, you can choose to Roll Back Driver by shifting to Driver tab after clicking Properties.
Method 5: Reinstall USB Controllers
Also, you should open Device Manager using the above method or other ways you like. Then, finish the following steps:
- Find and expand Universal Serial Bus controllers.
- Right click on a device and choose Uninstall device from the context menu.
- Click on the Uninstall button in the pop-up window.
- Repeat step 2 and step 3 to uninstall all devices under Universal Serial Bus controllers.
- Restart your computer and Windows will install the USB controllers automatically.
Method 6: Enable Legacy USB Support
Sometimes, you may find your hard disk not detected in BIOS. This may be caused by the disabled Legacy USB Support.
How to enable USB support:
- Restart your PC.
- Press the corresponding button to enter the BIOS utility.
- Shift to Advanced tab.
- Choose USB Configuration.
- Select Legacy USB Support and set it to be Enabled.
- Exit and save changes.
Note: the process will be a little bit different on different computer motherboards.
It’s not an easy task to recover data from a hard disk that is not detected in BIOS especially when the disk is an internal one. The good news is MiniTool Power Data Recovery bootable edition provides an easy way to recover data when the PC won’t start. As for how to recover data from undetected internal hard disk step by step, please read:
If you’re stuck in the data recovery from corrupted internal hard disk, the solutions and software provided here will be of great help.
Method 7: Install the Latest Windows Updates
This method has the same functionality as the Update driver.
- Type Windows Update into the Cortana search box.
- Select Check for updates from the Best match.
- Click on the Check for updates button and wait.
- Finish the rest operations according to prompts.
If you find some files get lost after Windows Update, please use MiniTool Power Data Recovery to recover data at once.
Method 8: Disable USB Selective Suspend Setting
- Type power plan into the Cortana search box.
- Select Choose a power plan from the search result.
- Click Change plan settings next to the plan used currently.
- Click Change advanced power settings.
- Find USB settings and click on the + button to expand it.
- Click on the + button to expand USB selective suspend setting.
- Change Setting to be Disabled.
- Click on the Apply button to confirm and click on the OK button to close.
Method 9: Install the Latest Chipset Drivers for Motherboard
- Look for the documentation of your computer to find the name of the motherboard manufacturer.
- Visit the website of the manufacturer.
- Find the drivers proper for your motherboard and install it on your computer.
Method 10: Repair the System Built-in Drivers
- Press F8 or another button to enter the safe mode during the boot process; select restart or shut down the computer and power on it later to enter the normal mode (to repair the registry).
- If the problem persists, please enter safe mode again to choose System Restore in order to restore your system to an earlier point when there’s no such problem.
- If the problem persists, please use the system disk to repair; open the command prompt, enter SFC / scannow, press Enter and insert the original system disk to repair the system
- If the problem persists, please set the CD-ROM as the first boot device in the BIOS; then, insert the system installation disc and press R key to select repair installation.
- If the problem still persists, I advise you to reinstall your OS.
Method 11: Run Anti-virus Program
If your PC is attacked by virus, unfortunately, any external hard drive connected to this PC will be affected. The virus may cause the external hard drive not showing issue. Please run anti-virus software to kill the virus and get Windows 10 to recognize your external hard drive.
RECOMMENDATION:
To recover data from virus infected external hard drive, you can try using MiniTool Power Data Recovery because of its excellent performance, high security, and simple operations. How to recover files after virus attack:
I feel glad to share solutions with users to help them recover files deleted by virus attack quickly and safely.
How to Fix: External Hard Disk Detected But Not Opening
There are also some people saying that their external hard drive could be detected by Windows, but can't be opened. The most direct reason is the file system problem.
When the file system of your hard drive is not supported by Windows, you won’t be able to access the drive. For instance, Windows gives no support for the ext4 file system (designed for Linux) and the HFS + file system (designed for Mac).
After clicking on the drive, you’ll be asked to format the disk before you can use it.
- If you choose Format, you should know that all your data saved here will be lost.
- If you choose Cancel, you will see the message: The volume does not contain a recognized file system.
Actually, themost common causes are:
- The file system is damaged.
- The file system is not supported.
- The drive becomes RAW.
- The parameter is incorrect.
- The file or directory is corrupted and unreadable.
- …
2 Methods for Solving External Hard Disk Detected But Not Opening
- Run CHKDSK in Command Prompt.
- Reformat the drive by using MiniTool Partition Wizard.
There are two useful methods for fixing the external hard drive detected but not opening error: run CHKDSK and format the drive.
Method 1: run CHKDSK.
- Type cmd into the Cortana search box on the taskbar (what if Windows 10 taskbar is not working?).
- Right click on Command Prompt from the search result.
- Choose Run as administrator from the context menu.
- Choose Yes in the User Account Control window.
- Type chkdsk /r * (* stands for the drive letter) and press Enter.
- Wait for the stages to complete.
Method 2: format the drive.
- Launch MiniTool Partition Wizard.
- Select the drive with an unsupported file system.
- Choose Partition from the menu bar and choose Format from the submenu.
- Choose NTFS or FAT32 as the new file system.
- Click on the OK button to confirm.
- Press the Apply button in the main software window.
- Choose Yes in the pop-up window to apply pending changes.
- Wait for operations to complete.
- Click on the OK button in the Successful window.
Click to see Format Partition Tutorial.
Conclusion
Though it may seem strange, it is not a rare problem that the external hard drive is not showing up/recognized/detected. There are many factors that could lead to this problem. When you find that your external hard drive is not showing up in your computer, please use the methods mentioned above to help your computer recognize the hard drive. You can also refer to this post to learn how to recover data from your external hard drive in different ways.
External Hard Drive Not Showing Up FAQ
? What do I do if my external hard drive is not detected?
First of all, you should go to open the Disk Management tool on your computer. Then, browse all the drives in the list to check whether the target hard drive is displayed here. If the external hard drive is found, please format it properly to make it show up.
According to study, the USB drive could disappear due to a lot of reason. The root reason for causing that is the driver of USB is tool old, missing, or corrupted somehow. You’d better make use of the Device Manager to check the status of USB driver.
The reason why a hard drive is not recognized in computer BIOS is not so complex. Once the connection between hard drive and PC is incorrect or the data cable is damaged, you can’t find it in BIOS. The SATA cables can fall out of their connection easily.
There are many factors to cause external hard drive disappear from the computer. So the corresponding solutions are diversified. For instance, you can change a USB Port, run the troubleshooter, or update the driver of the external hard drive to try to make it appear.
Hard drive not showing up in Windows, Disk Management or BIOS? No worries, this article will help you diagnose the problem and provide multiple solutions to fix it. It happens that a hard drive cannot be deleted in Windows or recognized by BIOS. When you encounter such problem and do not know what to do, you can check solutions in this tutorial to fix the issue.
Symptom of hard drive not showing up issue
Reasons why hard drive is not showing up in Windows
Method 1: Check hard drive cable connection
Method 2: Initialize and format hard drive
Method 3: Partition and format the hard drive
Method 4: Assign a drive letter for the drive
Method 5: Run hardware and devices troubleshooter
Method 6: Check for driver updates manually
Method 7: Enable drive in BIOS
Conclusion
Reasons why hard drive is not showing up in Windows
Method 1: Check hard drive cable connection
Method 2: Initialize and format hard drive
Method 3: Partition and format the hard drive
Method 4: Assign a drive letter for the drive
Method 5: Run hardware and devices troubleshooter
Method 6: Check for driver updates manually
Method 7: Enable drive in BIOS
Conclusion
Symptom of hard drive not showing up issue
You installed a hard drive on your computer and open File Explorer, but to your dismay, there is not drive icon representing the hard disk. Your computer failed to recognized disk, and you connect the disk to another PC, and end up with same result.
Hard drive not showing up is a common issue you may encounter during using computer. As long as you have a hard drive running on your computer, it's only a matter of time before you get the problem. There are several scenarios of this problem, for example, hard drive shows up in Disk Management not in Windows, disk not showing in Disk Management, hard disk shows up in BIOS but not in Windows, hard drive cannot be detected in BIOS, USB drive or external hard drive not showing up, etc. In some cases, even new hard drive cannot be recognized by computer.
Once a hard drive is not recognized on computer, you are no longer able to access data stored on it. If files on the hard drive do not have a backup, you might be driven mad by this issue. Perhaps you are trying to looking for solutions to this problem. Don't worry! The disk not showing up issue can be fixed in most cases, and the following content will help you dig causes and solutions.
Reasons why hard drive is not showing up in Windows
There is a variety of reasons why Windows or BIOS cannot detect the presence of your hard drive. Here is a list of possible causes of the problem, and you can refer to these factors:
- Connection issue. In some cases, storage device is not properly connected to computer and it cannot be recognized, for example, there might be something wrong with power supply, cable or USB port, etc.
- Hard drive capacity is unallocated. If a hard disk contains no partition and all disk space is unallocated, it won't show in Windows Explorer.
- Hard disk does not have a drive letter. A partition without a drive letter does not show in File Explorer. If it is the case, we can fix the disk not showing issue by assigning a drive letter.
- Hard drive is not initialized. If you check a disk in Disk Management and it is marked as 'Unknown, Not initialized', and it won't show in system.
- Disk driver is outdated. If your computer cannot recognized connected hard drive, there is a possibility that the disk's driver is outdated or not compatible with operating system.
- Disk is not enabled in bios or device manager. If a new hard drive cannot be detected by the system BIOS, the cause might be that the disk is not enabled.
- Bad sectors. Hard drive bad sector does not respond to read or write requests. A disk with too many bad sectors won't be recognized by system.
- Other physical damage. Hard drive contains moving physical moving components and it is relatively fragile to collision than SSD. If its heads gets damaged, and it cannot be accessed anymore.
Since causes to the issue vary from people, solutions, there are various solutions to fix it. The following part will present some methods which are mostly recommended by experts step by step and you can try these methods one by one.
Method 1: Check hard drive cable connection
There is possibility that a hard drive does not show up due to improper cable connection, which should be checked in the first place when you encounter the issue. A local hard drive is connected to computer's motherboard via two cables: the data cable and power cable. You should make sure these two cables works well and correctly connects hard disk and motherboard. If the connection is loose, you can try a new cable.
If cables are set correctly to devices and the hard disk still cannot be recognized, there might be something wrong with the SATA port. In that case, you need to plug data cable to a different port on your motherboard and check whether the problem can be solved.
If your hard drive is connected via USB port, you should try another USB port and a different computer. Besides, if you plug hard drive via a USB hub, it is recommended to connect disk to computer directly, as USB hub sometimes cannot provide sufficient power supply.
Method 2: Initialize and format hard drive
It happens that a hard drive does not show up in Windows Explorer but shows in Disk Management. However, the disk is shown as uninitialized due to some corruption issues. You can initialize the disk following these steps:
Mhdd Not Detecting Drive Software
Step 1 Access Disk Management. Press Windows logo key and R from keyboard to open Run box. Then type 'diskmgmt.msc' in Run box and click OK button. This will open Disk Management window.
Step 2 Find the uninitialized hard drive. There are two clues helping you locate the hard drive in question. First, the disk is marked as 'Unknown' and 'Not initialized' on the left, which means the disk is not formatted or created a volume; second, check whether the disk size matches the capacity of the drive you connected.
Step 3 Right-click on the area of the disk name and select 'Initialize Disk' from context menu.
Step 4 Select partition style for the disk you want to initialize and click OK button.
There are two partition styles: MBR (Master Boot Record) and GPT (GUID Partition Table). If you do not know which one to choose, you can read the article first: MBR VS GPT, which one is the better choice for your computer?
Step 5 Right-click on the disk again and select 'New Simple Volume'. Then you can follow the onscreen instruction to create new partition and format the disk.
Method 3: Partition and format the hard drive
We often use Disk Management to check disk status and file system issue, because Disk Management can display a disk which has not been partition and is full of unallocated space. To make the hard drive shown in Windows Explorer you should create partition on the disk. However, if the hard drive is suffering from partition loss issue, you should not create new partitions before lost data is recovered. On this occasion, lost partition recovery should be performed prior to any other actions.
This section will show you how to restore deleted or lost partitions directly from hard drive as well as how to partition a hard disk. If partition recovery is not needed, you can move to Way 1 and Way 2 to partition the hard drive.
Way 1: Recover deleted / lost partition
Deleted or lost partitions cannot be restored by Disk Management, but we can use partition recovery software to get back lost volume easily. It is highly recommended to use Eassos DiskGenius Pro to do the job for you. This partition recovery software is able to restore deleted partition back to the status before they got lost, which means files and folders in the partition will be recovered at the same time. Once lost partitions are recovered, they can be accessed again under Windows. Besides, the partition recovery feature supports multiple file system types, including NTFS, FAT32, exFAT, FAT16, FAT12, Ext2, Ext3 and Ext4. Let's see how recovery works:
Step 1 Install and launch Eassos DiskGenius from your computer, and then you can see all disks connected to your computer.
Step 2 Select the hard drive which loses partitions and click 'Partition Recovery' button from the toolbar.
Step 3 Click Start button and DiskGenius starts to search for lost partitions on the selected disk area.
Step 4 Reserve or Ignore partition. Once a partition is found, you'll be prompted to make decision between Reserve and Ignore. The simple rule is to reserve the one you want to recover and ignore incorrect partitions.
How to decide whether the partition is the one you need to recover? You can easily make the choice by previewing files in the partition. DiskGenius allows to preview files in the partition it finds out, and you can view and open these files to make sure if the partition is correct.
Step 5 Save lost partitions to partition table by clicking Save All button.
Step 6 Select partition table style for the disk and click OK. You can either choose partition table style on your own or follow the suggested option.
Way 2: Create partition in Windows Disk Management
If you want to create partition on hard drive in Windows Disk Management, please follow these steps:
Step 1 Open Disk Management, right-click on unallocated space and select New Simple Volume option from context menu.
Step 2 The New Simple Volume Wizard will be launch and it will guide you through the process of creating a new partition on unallocated space.
Step 3 In the rest steps you'll be asked to set partition size, driver letter, file system type, volume label, formatting type, etc. You can follow suggested setting and click Next button until the partition is created successfully.
Way 3: Partition hard drive to multiple volumes quickly using Windows partition manager
This method is able to quickly partition / repartition a hard drive into multiple partitions at one time, and the process is simple and quick. Here we'll use a free Windows partition manager to do complete the task.
Step 1 Launch Eassos DiskGenius from your computer. Select the hard drive that needs to be partitioned and click 'Quick Partition' button.
Step 2 Select partition table style, partition count, partition size, volume name, etc. and click OK button.
Note: the option 'Align Partition to Integral Multiple of Sectors' option should be selected if you want your partition to be 4K aligned. The value next to the option can be the default setting, which satisfies the 4K alignment requirement. Dropbear ssh client windows.
Step 3 Wait for a while, new partitions will be created and formatted.
Method 4: Assign a drive letter for the drive
Without a drive letter, partition won't be displayed in Windows. If the hard drive which does not show up in Windows has been well connected to your computer and properly partitioned, you still cannot access it in File Explorer, you should make sure if it has a drive letter. Here is how to assign a drive letter:
Step 1 Launch Disk Management, right-click on the partition which is lack of drive letter and select 'Change Drive Letter and Paths' option from context menu.
Step 2 Click 'Add' button on the 'Change drive Letter and Paths' dialog box. Then another dialog box pops up.
Step 3 Select 'Assign the following drive letter' option and choose a letter from the drop-down list. Then click OK and the drive letter will be added to the partition. Igo8 software download.
Method 5: Run hardware and devices troubleshooter
Hardware troubleshooter is a built-in tool in Windows 7/8/10. If your installed hard drive or other hardware does not work properly as expected, you can try this tool to check if there are any errors on the device.
Step 1 Right-click on Start menu and select Settings to open Setting window Then select Update & Security option.
Step 2 Click Troubleshoot on the left pane and find the option 'Hardware and Devices' on the right side. Click 'Run the troubleshooter' button.
Step 3 A window pops up to analyze hardware issue. Then you can follow the wizard to finish the process.
Method 6: Check for driver updates manually
The hard drive not showing up issue might be caused by corrupted or incompatible drivers, and you can update drivers manually like this:
Step 1 Open Device Manager. Press Windows logo key and R to open Run dialog box, type devmgmt.msc and click OK button.
Step 2 Expand Disk driver and locate the hard drive or external hard drive which cannot be detected by Windows.
Step 3 Right-click on the disk in question and select 'Update Driver Software' from context menu.
Step 4 If there are any updates, follow the instructions to update drivers.
Method 7: Enable drive in BIOS
If your hard drive does not show in Disk Management, you should check if it can be detected in BIOS (Basic Input / Output System). BIOS is responsible for monitoring the communication between hardware devices connected to your PC and operating system. Thus, you can enter BIOS to check status for the hard drive that cannot be recognized by system. That's because the hard drive might be turned OFF in System Setup, for some motherboard manufactures disable unused ports in BIOS by default.
Please note that the BIOS interface and settings, and how to enter BIOS differs from BIOS versions and motherboard brands. You can consult support team of your motherboard or computer for detailed steps to access BIOS. Besides, be careful when making changes in BIOS, as any improper operation may lead to serious problem. If you are new to these operations, please read manual carefully in advance or ask a computer expert to help you.
Step 1 Restart computer and keep pressing the function on your computer which allows you to enter BIOS.
The key might by F1, F2, F3 or Delete, and it will be prompted on the screen before operating system boots. Also, you can consult your PC's manufacturer for user manual.
Step 2 Select Boot tab to check if your hard drive is listed there.
Step 3 If you cannot see your hard disk, you can try enabling the controller for the disk. Exact settings for this can be found in your motherboard or PC manuals. Once the disk is turned on, restart computer and check if it can be recognized in Disk Management.
Conclusion
Mhdd Not Detecting Drive Free
This article discusses hard drive not showing up issue and provides 7 methods to fix the problem. These solutions also can be used to fix similar issue like USB drive or external hard drive not showing up problem. If you have better solutions or any questions regarding this issue, please feel free to contact us.